Koch Chemie M3.02 Micro Cut - Finishing Polish (250 ml)

Koch Chemie MICRO CUT M3.02

POLISHING PASTE WITH MICRO-PARTICLES FOR HOLOGRAM REMOVAL AND MAXIMUM GLOSS

Micro Cut M3.02 is a premium finishing polishing paste designed to remove holograms, fine scratches, and polishing marks. It contains extremely homogeneous abrasive particles that ensure a brilliant and permanently high gloss, even on dark and sensitive painted surfaces.

Thanks to advanced technology, it mechanically removes holograms and creates a perfect final effect. It contains no silicone oils and is ideal for all types of clear coats, including scratch-resistant ones. It is easy to spread, excellent to work with, and leaves no residue after polishing.

PRODUCT ADVANTAGES

• Removes holograms and fine scratches up to P3000 grit
• Creates brilliant, permanently high gloss
• Ideal for dark and sensitive clear coats
• Contains no silicone oils
• Easy to spread and polish
• Professional paint finish

TECHNICAL PARAMETERS

• Abrasiveness: 3.2/10

• Gloss level: 9/10

AREAS OF APPLICATION

• Car paintwork
• Commercial vehicles
• Motorcycles

INSTRUCTIONS FOR USE

1. Thoroughly wash and dry the surface.
2. Shake the paste and test on a small area to verify compatibility with the paint.
3. Use a Micro Cut Pad and an eccentric polisher.
4. Apply the paste to the polishing pad and spread it evenly over the surface.
5. Take an applicator and spread the paste in a very thin film over the part to be polished.
6. Turn on the polisher to a higher speed and work with light pressure in a cross-hatch pattern.
7. Continue polishing until a transparent film forms – this means that the contained aluminum oxide has completely decomposed.
8. To remove paste residue, wipe with a high-quality and soft microfiber cloth.

SAFETY INFORMATION

• Protect from frost and excessive heat.
• Do not use on hot surfaces.
• Always test the product's suitability on a small, inconspicuous area before use.