Koch Chemie M3.02 Micro Cut | Finishing Compound (1 L)

Hologram removal and ultimate finishing gloss

Koch Chemie Micro Cut M3.02 is a fine finishing polish designed to remove holograms, fine scratches, and traces of previous polishing. It contains extremely homogeneous abrasive particles that ensure a brilliant and permanently high gloss, even on dark and sensitive paint surfaces.

Thanks to its advanced technology, it mechanically removes holograms and creates a clear final finish. It contains no silicone oils and is suitable for all types of paint, including scratch-resistant ones. It spreads easily, works smoothly, and leaves no polishing residue behind.

Product benefits

• Removes holograms and fine scratches up to P3000 grit.
• Creates a brilliant, permanently high gloss.
• Ideal for dark and sensitive paints.
• Contains no silicone oils.
• Easy to spread and polish.
• Professional paint finishing.

Technical parameters

• Abrasiveness: 3.2/10.
• Gloss level: 9/10.

Areas of application

• Passenger car paints.
• Commercial vehicles.
• Motorcycles.

Instructions for use

1. Thoroughly wash and dry the surface.
2. Shake the polish well and test on a small area to verify compatibility with the paint.
3. Use a Micro Cut Pad and an orbital polisher.
4. Apply the polish to the pad and distribute it evenly over the surface, or use an applicator to spread a very thin film over the area to be polished.
5. Switch the polisher to a higher speed and work with light pressure in a cross-pattern motion.
6. Continue polishing until a transparent film forms – this means the aluminum oxide has fully broken down.
7. Wipe off any remaining polish with a high-quality, fine microfiber cloth.

Safety information

• Protect from frost and excessive heat.
• Do not use on hot surfaces.
• Always test the product's suitability on a small, inconspicuous area before use.

Frequently asked questions

Which pad should I use with M3.02? Preferably the Micro Cut Pad with an orbital polisher.

Does the polish contain silicone oils? No, the formula is free of silicone oils, so it leaves no residue that could affect further paint treatment.

How do I know when polishing is finished? A transparent film will form on the surface – this indicates that the abrasive particles have fully broken down.

Is it suitable for dark paints? Yes, the homogeneous abrasive particles ensure a high gloss even on dark and sensitive paint surfaces.

What is the difference between the 1 L and 250 ml sizes? The formula is the same; only the volume differs – 1 L is suitable for frequent or professional polishing, while 250 ml is for occasional use.