Koch Finisher Bundle | Interior Cleaning Kit

Complete interior and glass cleaning and protection kit

Want to keep your interior clean, matte and protected without putting together a selection of products from different brands? The Koch Finisher Bundle combines four Koch Chemie Finisher products and three NOX Equipment microfiber cloths in one kit. Clean plastic and rubber surfaces, protect them with UV protection, safely clean displays, and finish the glass streak-free.

The kit is designed as a logical step-by-step process: clean first, then protect, and finish with the details. All the products work well together, and the cloths make the job easier.

What’s in the kit

• Koch Finisher InsideUp (500 ml) – a cleaner for unpainted plastic and rubber floor mats that removes dried-on dirt, grease and dust, leaving a fresh scent.
• Koch Finisher InsideCare (500 ml) – a plastic care product with a velvety matte finish, UV protection and a dirt-repellent effect.
• Koch Finisher DisplayExpert (100 ml) – a specialist cleaner for displays, navigation screens and touch panels that leaves no streaks.
• Koch Finisher ClearView (500 ml) – a ready-to-use window cleaner for interior and exterior glass that leaves it clean and streak-free.
• NOX FiberOne (2×) – versatile 250 GSM, 40×40 cm microfiber cloths for wiping away cleaners and applying or buffing care products.
• NOX VisionOne (1×) – a 400 GSM, 40×40 cm waffle-weave microfiber cloth designed for glass and final buffing.

Why this kit makes sense

A clean interior takes more than a single product. Plastic surfaces need to be thoroughly cleaned first before protection is applied; otherwise, dirt gets sealed beneath the dressing. Displays need gentler care than plastic, while glass requires its own cleaner and the right cloth. This kit brings all the steps together, including the cloths you’ll need for each one.

Recommended process

1. Spray InsideUp onto plastic surfaces or a cloth, let it work briefly, then wipe with a clean FiberOne. Use a brush on carpets and coarser textures.
2. Once dry, apply InsideCare to a soft foam applicator, spread evenly, let it dry, then buff with the second FiberOne.
3. Clean displays with DisplayExpert, always spraying it onto a cloth first—never directly onto the display.
4. Spray ClearView onto the glass, spread it, then buff with the dry side of the VisionOne cloth.

What to watch out for

• InsideUp and InsideCare are intended for unpainted interior plastic and rubber.
• Do not use InsideCare on the steering wheel or pedals to avoid creating a slippery surface.
• Do not apply DisplayExpert directly to the display; always use a cloth.
• Test the products on a less visible area before first use.

Key details

• Type: interior and glass cleaning and protection kit
• Products: InsideUp 500 ml, InsideCare 500 ml, DisplayExpert 100 ml, ClearView 500 ml
• Cloths: 2× NOX FiberOne (250 GSM), 1× NOX VisionOne (400 GSM)
• Suitable for: plastic, rubber floor mats, displays, and interior and exterior glass

Frequently asked questions

What’s included in the kit?
Four Koch Finisher products (InsideUp, InsideCare, DisplayExpert and ClearView) and three NOX microfiber cloths: 2× FiberOne and 1× VisionOne.

In what order should I use the products?
First clean plastic surfaces with InsideUp, then treat them with InsideCare, clean displays with DisplayExpert, and finally clean the glass with ClearView.

Is the kit suitable for beginners?
Yes, all the products are ready to use, so there’s no need to dilute anything.

Is ClearView also suitable for exterior glass?
Yes, it’s suitable for both the inside and outside of glass.