Koch Chemie P6.02 One Cut & Finish | One-step polishing compound with wax (1 L)

One-step polishing compound with carnauba wax

Koch Chemie One Cut & Finish P6.02 is a one-step polishing compound with an improved formula, suitable for both soft and hard paints. It contains carnauba wax, which provides high gloss and protection in one step. The compound is designed for machine polishing and effectively removes sanding marks, holograms, and scratches up to P2000 grit.

Thanks to its homogeneous abrasive grains, it creates a brilliant, long-lasting glossy finish. One Cut & Finish P6.02 combines an optimal ratio of abrasiveness and gloss, significantly accelerating the vehicle polishing process. It is easy to spread and polish, which facilitates work and delivers professional results.

Product Benefits

• Fast and efficient one-step polishing.
• Removes holograms, scratches, and sanding marks up to P2000 grit.
• Contains carnauba wax for long-lasting shine and protection.
• Optimized ratio of cutting power and gloss.
• Easy to spread and polish.
• Contains non-volatile silicones.

Technical parameters

• Cut level: 6/10.
• Gloss level: 8/10.

Areas of application

• Passenger car paints.
• Commercial vehicles.
• Motorcycles.

Instructions for use

1. Wash and thoroughly dry the surface.
2. Shake the bottle well before use.
3. Test on a small area to verify compatibility with the paint.
4. Use the One Cut Pad and an eccentric polisher with a 15 mm stroke or a rotary polisher.
5. Apply 5 drops of the polishing compound evenly onto the pad.
6. Turn the polisher toward the surface and start polishing at the lowest speed.
7. Polish with medium pressure in a cross-hatch motion.
8. Once finished, remove any residue with a microfiber towel for a clean finish.

Safety information

• Protect from frost and excessive heat.
• Do not use on hot surfaces.
• Always test the suitability of the product on a small, inconspicuous area before use.

Frequently Asked Questions

Which pad should I use with P6.02? With the One Cut Pad and an eccentric polisher with a 15 mm stroke or a rotary polisher.

Does the compound contain wax? Yes, carnauba wax, which provides both shine and protection in one step after polishing.

Do I need to test the compound before use? Yes, always test it on a small, inconspicuous area first to verify compatibility with the paint.

What is the difference compared to M3.02 Micro Cut? P6.02 is a one-step compound with a medium cut (6/10) for both defect correction and gloss, whereas M3.02 is a fine finishing compound (cut 3.2/10) intended purely for hologram removal and maximum gloss.