Bad Boys Iron Remover | Fallout Remover for paint and wheels (1 L)

It pulls out rust from the paint that regular washing won't even show

The paint may look clean, but it still contains embedded metal particles from brakes, railways, or industrial fallout. RRC Bad Boys Iron Remover is a gel-based airborne rust remover for the chemical decontamination of paint, wheels, and glass, which dissolves iron impurities without unnecessary mechanical scrubbing.

During the reaction, the product turns a dark purple to red color, so you can see exactly where it is loosening the contamination. The thick consistency holds well even on vertical surfaces and gives the active ingredients enough time to work.

RRC BAD BOYS IRON REMOVER IN A NUTSHELL

• Dissolves airborne rust, brake dust, and iron particles.
• Gel formula stays on paint, glass, and wheels longer.
• Visible color reaction shows where the product is working.

A clean look is not enough – a clean surface is what matters

Iron contamination gets trapped deep in the surface and a regular car shampoo cannot remove it. The paint can then feel rough to the touch, and the subsequent wax, sealant, or ceramic coating will not be applied to a perfectly prepared base.

Iron Remover helps to chemically loosen these particles without aggressive contact with the paint. It is therefore an important step before claying, polishing, and applying long-term protection.

Long working time without quick runoff

The thick gel formula stays on the surface longer than thin airborne rust removers. Depending on the conditions, you can leave it to react for up to 15 minutes, but always check the surface and do not let the product dry.

The formulation with a pH of approximately 6 is suitable for paint, glass, wheels, and ceramically protected surfaces. The product is ready for immediate use without dilution.

Instructions for use

1. Shake the bottle thoroughly before use.
2. Apply the product to a cool and dry surface away from direct sunlight.
3. Leave it to react until it turns a dark purple to red color, for a maximum of approximately 15 minutes depending on conditions.
4. For heavily soiled wheels, you can enhance the effect with a brush or mitt.
5. Rinse the surface thoroughly with pressure water before the product dries.