Carbon Collective Clear Coat Ceramic Bundle | Ceramic Protection Kit (up to 1 year)

Spray ceramic and everything for application in one kit

The Carbon Collective Clear Coat Ceramic Bundle combines the Clear Coat Ceramic Lite spray ceramic protection with the necessary surface preparation and application tools – Panel Prep, a CoatPad applicator, and three FiberWipe towels. Everything you need for the first application without needing to purchase anything extra.

What you will find in the kit

• Carbon Collective Clear Coat Ceramic Lite (250 ml) – spray ceramic protection with durability of up to 12 months / 8,000 km for paint, wheels, glass, and plastic trim.
• Carbon Collective Panel Prep (500 ml) – a surface cleaner and degreaser, an essential step before any ceramic application.
• NOX Equipment CoatPad – a microfiber glove-style applicator with a membrane for applying ceramic coatings.
• 3x NOX Equipment FiberWipe (350 GSM, 40x40 cm) – microfiber towels for wiping off and buffing after application.

Why this combination makes sense

Clear Coat Ceramic Lite is the fastest route to ceramic protection – a spray-on application without the need for complex polishing. Even so, it requires a thorough degreasing of the surface, which is why the kit includes Panel Prep. The CoatPad applicator and three FiberWipe towels cover the application and buffing for the entire car, so you don't have to buy anything else.

Frequently asked questions

Is the kit enough for a whole car?
Yes, the 250ml bottle of Clear Coat Ceramic Lite is enough for up to 25 cars, so there will be plenty left over for one car for a possible second layer or later touch-ups.

Do I have to degrease the surface before application?
Yes, degreasing with Panel Prep is an absolutely essential step, not an optional accessory – without it, the coating will not bond evenly, and its durability will be significantly reduced.

How long does the protection last?
Up to 12 months or approximately 8,000 km with regular maintenance using a pH-neutral shampoo.

Recommended application procedure

1. Work in the shade on a cool surface, ideally above 5 °C.
2. Wash the vehicle thoroughly and perform a chemical and mechanical decontamination of the paint.
3. Immediately before application, degrease the surface with Panel Prep – this step is essential, not optional.
4. Apply using the CoatPad applicator – two initial sprays, then one per panel.
5. Wipe off the excess within 10–20 seconds of application using a FiberWipe towel.
6. For increased durability, a second layer can be applied.

Summary in points

• Type: spray ceramic protection + prep and application kit
• Includes: Clear Coat Ceramic Lite (250 ml), Panel Prep (500 ml), CoatPad, 3x FiberWipe
• Volume: 250 ml + 500 ml
• Durability: up to 12 months / 8,000 km
• Suitable for: paint, wheels, glass, plastic trim, PPF films, carbon composites, and full vehicle wraps